Create a Simple Profile

A simple profile is the quick manual path. It covers the values most shooters need to get a working solution without opening the full advanced editor.

Worked walk-through

Use this sample load: Hornady 6.5 Creedmoor 147gr ELD-M.

1. Open Ballistics and start a new profile.
2. Choose Simple Profile.
3. Name the profile 6.5 Creedmoor - 147gr ELD-M.
4. Set the caliber to 6.5 Creedmoor.
5. Enter a Bullet Weight of 147 gr.
6. Leave the drag model on G7 and enter a Ballistic Coefficient of 0.351.
7. Enter a Muzzle Velocity of 2695 fps.
8. Set Zero Range to 100 yd.
9. Set Sight Height to 2.0 in.
10. Choose the Reticle Units that match your scope.
11. Save the profile and review the solution screen.

What to enter carefully

• Ballistic Coefficient: this worked example uses the published G7 value for this load.
• Muzzle Velocity: use measured data when you have it.
• Zero Range: even a small mistake here changes every solution.
• Sight Height: measure from the center of the bore to the center of the optic.
• Reticle Units: match the app to your scope so your holds make sense.

When to use a simple profile

• You already know your load data.
• You want a quick manual setup.
• You do not need advanced bullet inputs on day one.

When you are ready for more control, continue with Create an Advanced Profile.